MS-A EHB-50S
ENDO Air Balancer MS-A EHB-50S.jpg

Only Registered Users are able to view pricing.

Lift control module
with the fall-arrest device 0~270kg

Speed control is available using the speed adjustment screw of the lift control module.
With the floating feature, you can raise and lower the suspended load over an approx. 35 cm range from the stop position while holding the load by hand.
This type is equipped with a fall-arrest device.
The device prevents the load from dropping even if the air supply is shut off or the pendant switch hose breaks.
Two types of controller are available: pendant type and grip type.With the grip type controller, you can slide the controller up and down while holding the grip.

Additional information

Control module specifications
Name Model Hose Operation Mass(kg)
Lift control module MS-A Straight×3 Pendant type 3.5
Lift control module MS-AG Coil×3 Grip type 6
Air Balancer Series (Wire rope) Specification
Model Air pressure
(MPa)
Hoisting
capacity(kg)
for lifting
Stroke
(m)
Main equipment
mass
(kg)
Wire rope
diameter
(mm)
Air inlet
EHB-50S 0.7 55 0.7 19 Φ4.76 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-50 0.7 55 1.9 28 Φ4.76 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-85 0.7 90 1.9 29 Φ4.76 Rc 3/8
0.6 75
0.5 62
0.4 50
EHB-130 0.7 140 1.9 36 Φ4.76 Rc 3/8
0.6 120
0.5 100
0.4 80
EHB-270 0.7 270 1.8 43 Φ6 Rc 3/8
0.6 230
0.5 190
0.4 150
Air Balancer Series (Link chain) Specification
Model Air pressure
(MPa)
Hoisting
capacity(kg)
for lifting
Stroke
(m)
Main equipment
mass
(kg)
Link chain
(Dia. x No. of falls)
Air inlet
EHB-50SC 0.7 55 0.65 20 4.0×1 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-50C 0.7 55 1.8 29 4.0×1 Rc 3/8
0.6 48
0.5 40
0.4 32
EHB-85C 0.7 90 1.8 30 4.0×1 Rc 3/8
0.6 75
0.5 62
0.4 50
EHB-130C 0.7 140 1.8 37 4.0×1 Rc 3/8
0.6 120
0.5 100
0.4 80