| Model |
DT-300PII |
| Welding power source |
Type |
DT-300P (CE-Marking) |
| Rated input voltage |
V |
400±15% |
| Phase |
|
3 phase |
Single phase |
| Rated input |
kVA |
TIG:10.1 (8.1kW), Stick:11.5 (9.2kW) |
TIG:8.7(7.6kW), Stick:8.5 (5.9kW) |
| Rated duty cycle |
% |
40 |
| Range of rated output current |
A |
TIG:4~300, Stick:10~250 |
TIG:4~250, Stick:10~180 |
| Rated load voltage |
V |
TIG:22, Stick:30 |
TIG:20, Stick:27.2 |
| Max. No-load voltage |
V |
58 |
| Initial, crater filler current |
A |
TIG:4~300, Stick:10~250 |
TIG:4~250, Stick:10~180 |
| Pulsed current |
A |
TIG:4~300, Stick:10~250 |
TIG:4~250, Stick:10~180 |
| Base current |
A |
TIG:4~300, Stick:10~250 |
TIG:4~250, Stick:10~180 |
| Gas pre-flow |
Sec |
0.1~20 |
| Gas post -flow |
Sec |
0.1~30 |
| Up-slope |
Sec |
0.1~10 |
| Down-slope |
Sec |
0.1~10 |
| Pulsed frequency |
Hz |
0.1~500 |
| Pulse width |
% |
50 (possible to change by FunctionKey 5~95%) |
| Crater filler control |
|
⌠On⌡ ⌠Off⌡ ⌠Repeat⌡ change type |
| Arc spot |
Sec |
0.1~10 |
| The number of job memory |
|
30 |
| Dimensions ( W x D x H ) |
mm |
250x640x395 (without carrying handle) |
| Weight |
kg |
30 |
| Start type |
|
High frequency start / Lift start |
| Welding Torch |
Type |
AWD-26 |
AWD-18 |
| Rated current |
A |
200 (DC), 160 (AC) |
300 (DC), 260 (AC) |
| Rated duty cycle |
% |
50 |
100 |
| Cooling method |
|
Air-cooled |
Water-cooled |
| Electrode size |
mm |
(0.5), (1.0), (1.6), (2.0), 2,4, (3.2), (4.0) |
| Cable length |
m |
4 or 8 |
